machine has been designed with health and safety approval for fast and
consistent polyester welding and encapsulation.
jaws means you are not restricted by the jaw width, and can continually weld
very wide sheets. This style of operation allows much more room to work with
the material you are sealing.
Crossweld™ is designed especially to suit the welding of polyester film, which
requires a flat support surface both sides of the weld. The sealing of
polyester film requires machines that have been manufactured for the precise
welding of the very narrow band melt point of polyester film, if it’s too high
it will melt through the film, too low and it will not seal. The welding element
must be fitted to the top moving jaw, not on the base/bottom as with bag
sealers, this is essential for lining up the weld and sealing polyester to
compensating device uses the latest electronics to ensure consistent welds
Crossweld™ can be used for sealing various thicknesses of polyester film and
other materials to make pockets, sleeves and bags.
alignment grid squares can be replaced when worn. Replacement heating elements
and PTFE material are easily installed. The PTFE cloth protecting the welding
element is simply replaced by winding new material into place from the roll
attached to the machine, a real advantage for quality welds.
enclosures, pockets, sleeves and bags with many materials, Polyester bonded to
paper or board, Reemay, Hollytex, Tyvek, PEL Softwrap, Bubble film, Marvel Seal
Size : Length
910 mm, width 400 mm , depth 170 mm
instructions, spare element and PTFE cloth
is shipped in a wooden crate arriving ready for use
|A806-8000||Crossweld Polyester Film Sealing Machine|
|A806-7002||Spare PTFE Cloth 700 x 600 mm|